Thermador PRDS364GDUS 20110081
Posted 19 October 2010 - 10:39 AM
I feel like the Shoemaker that his kids all run around barefooted.
I have been putting this off for a long time.
(range is big and heavy)
This was a big mistake buying in the first place,
but I need to move on.
bake will not reach temperature (most of the time)
Wiring and bake element checked all OK.
The biggest problem I have is not understanding or
recognizing the controls.
Control knob goes all the way around, so this is not a
strictly mechanical thermostat.
Indicator light showing temperature has been met is
consistent with low temperatures (stays on)
Oven cavity has bulb type thermostat instead of electronic sensor.
It seems obvious that it needs a new Thermostat.
I cannot identify if that is one part or several.
Unit also has a Push button switch to get the Oven mode
anyone familiar with this system?
Posted 19 October 2010 - 04:18 PM
I PMed you the service manual for this range.
Posted 20 October 2010 - 03:57 AM
information on this range has been sparse.
I fear that the Tstat is not available.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users