KitchenAid Dishwasher Model KUDI 01 TJBL 0
Posted 17 November 2010 - 04:32 AM
I replaced the heating element with the KitchenAid kit, which included a new electronic control component, no problems with the installation. I moved the ceramic block (thermal fuse?) from the old control board to the new control. I then started the dishwasher and it ran, initially all seemed fine, but the machine quit somewhere during this first run (sometime after the detergent was released) with a small amount of water remaining in the bottom of the tub.
Now, when I try to start the dishwasher, the control panel light (e.g. "normal cycle") comes on, then I push the "start" button and there is no action by the machine, and then the light goes out; machine doesn't start, nothing.
Thanks for your help.
Posted 17 November 2010 - 09:07 AM
I checked continuity on the thermal fuse, the door switch, and the overfill switch--all are fine.
The "cancel/drain" button works, runs the drain pump for about 2 minutes, then off. The rest of the cycle buttons still light up, do nothing, turn off.
I'm ready to call the repair service/price a new dishwasher.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users