Kitchenaid dishwasher KUDP02IRWH2 dead
Posted 28 November 2010 - 12:37 AM
The dishwasher's junction box has 120Vac, so it isn't a circuit breaker.
The power up circuit is:
I need to access the bi-metal switch and the door lock see if either is open circuited.
The parts list show components in the front door assembly, but no dotted lines indicating relative positions:
#6 is the bimetal thermal switch
#12 is the door switch
How do I access the switches? From the front somehow? Or does the read panel need to come off? Or what?
Posted 28 November 2010 - 10:51 AM
door switches are self-expanitory, they are on the door latch
remove screws around the inner door liner to access these components
Edited by BrntToast, 28 November 2010 - 10:52 AM.
hope i've been helpfull, if you wish to buy Brnt beer kick here
feel free to prvt msg frigidaire questions my way
(i dont log in every day)
Posted 01 December 2010 - 11:07 PM
The fault was the bimet fuse. The controller board runs OK when its powered.
pump motor current draw - 1.5A
washer motor current draw - 7.5A
heater current draw - 4A
Measurement by clamp-on analog ammeter of early '80's vintage.
Is a service manual for these Kitchenaid branded Whirlpools available? Something with disassembly info? (I'm willing to pay for service documentation).
Posted 01 December 2010 - 11:11 PM
Need parts? Call our Parts Department now! 877-803-7957
Posted 29 December 2010 - 12:30 AM
Apparently the dry cycle current is regulated, as apparent from the decay curve. Probably temperature sensed with the current regulated to maintain a temperature setpoint.
For reference the cycle diagram is also shown.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users