Guest Bobo385 Posted November 28, 2010 Share Posted November 28, 2010 ken frig 795.77243602 Fresh food section the lights are possessed will stay on with the doors closed burnt the top a bit then will not come on at all this go on back and forth. Light switches are good. Think its about the time out sensor. Not sure who made it for ken wondering why they would do this to the lights. Link to comment Share on other sites More sharing options...
BrntToast Posted November 28, 2010 Share Posted November 28, 2010 (edited) made by LGi havn't been able to find the wiring diagram, if you can take a picture of yours on the back of the fridge and post it upi suspect the lights are switched,and then controled by a relay on a board, this relay is probably stuck closedsome fridges have a thermostat located near the lights to prevent overheating,and this would explain why the lights go out and not work for a while, the therm trips and then has to cool before it resetswithout that wiring diagram i am thinking you need the good ole LG fridge control board i hope you have removed the light bulbs to prevent further damage Edited November 28, 2010 by BrntToast Link to comment Share on other sites More sharing options...
RegUS_PatOff Posted November 28, 2010 Share Posted November 28, 2010 Kenmore 795.77243602 made by LGsimilar to LRFD22850STquote from post of a different LG model:This repair is **usually** done by LG for free.Call LG Customer Service: 1-800-342-0000Parts needed:1) Main Board2) Lens Cover3) Reflector4) Case / Housing5) Sockets6) OverlayThe new MAIN BOARD has a much larger lightbulb-relay---which reduces the possibility of a repeat. In addition--the SOCKET ASSY has a THERMOSTAT wired-in. This shuts off the light bulbs if the temperature of the lightbulbs & the housing becomes too hot. Link to comment Share on other sites More sharing options...
BrntToast Posted November 28, 2010 Share Posted November 28, 2010 once again master Reg comes throughwhatever the samurai pays you, he should double it we both know the humor in that statement Link to comment Share on other sites More sharing options...
Guest Bobo385 Posted November 28, 2010 Share Posted November 28, 2010 Yep took the light bulbs out. Did not see wiring diagram on the back couldn't find a tech sheet either unit looked like someone worked on it before me. can u send me the lrfd22850st manual. your manuals are like gold cant get enough of them Link to comment Share on other sites More sharing options...
Guest Bobo385 Posted November 28, 2010 Share Posted November 28, 2010 forget the manual.Already have it from your site just found it. Thank you Link to comment Share on other sites More sharing options...
Recommended Posts