Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Whirlpoop LSQ9645KT1


Gavrillo

Recommended Posts

I would like the service manual for this washer also if someone real quick can explain how to remove the bolt that holds the agitator down the "dogs wont hunt anymore" and is agitatates ever fourth mpovement I know i need to replace the dogs but I cant tell if that bolt is to be pryed out or is threaded it lokos like it does not have theads and it has to be pryed out some how. Help!!!!

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • Gavrillo

    2

  • kdog

    1

  • RegUS_PatOff

    1

Top Posters In This Topic

It's the bolt under the agitator cap thats the one it looks like a normal bolt bit the diagram shows it to have a bulge or knob on it there does not appear to have threads on it

Link to comment
Share on other sites


×
×
  • Create New...