Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

timmy

GE WWA8608MXLWW

3 posts in this topic

Ogenki desuka?

No hot water. swapped hoses, no suprise--we got hot on cold.

Pulled the little cover off, swapped wires, and put hoses back, no surprise--we got hot on cold again.

 

It seems that all I need to do is pull off the internal hose, pull the four wires off, install new...switch?...and put it all back together. 

FYI, I bought this used in 97. I think it was several years old then. Paid $300 for both, and it was probably the best money I ever spent.

Thoughts?

Domo arrigato gozaimasu.

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

Just posted an answer on a similar problem on a Kenmore washer, you can read that here.

In your case, I would also check the voltage going to each valve when you have warm water selected. Each valve should get about 120vac.

Share this post


Link to post
Share on other sites

OK...we've come to a cross roads...we have one hose in very sad shape, and a solenoid or solenoid switch that will need replacing.

Given that we will be buying a new washer in the next six months (I hope), would we be better off just doing laundry in cold water?:)

I'll have to buy an ohmmeter, so through that cost in there too.

Share this post


Link to post
Share on other sites