Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE Refigerator TFA27RMA


repairontheside

Recommended Posts

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • repairontheside

    4

  • Samurai Appliance Repair Man

    2

  • Team Samurai

Me no gotty nuttin' w'dat model number. Double check that fer me, budrow. :wc:

Link to comment
Share on other sites

  • Team Samurai

I think your first model number was good, RC has parts for it. But there's not tech manual or info that I can find. These are the simple mechanical controls, though. You don't need a service manual with these. Should have a plastic wiring diagram/tech sheet in the control compartment.

What problem are you having with it?

Link to comment
Share on other sites

repairontheside

Already purchased the ice cube chute from RC. Just need to see diagram on how to take of the front panel piece to access the screws for the ice cube chute. Based on response from info request at RC, I might be able to pop off top panel by prying off with flat edge with tape to prevent damaging the paint.

Link to comment
Share on other sites

×
×
  • Create New...