GE Icemaker Won't Fill or Harvest
Posted 17 February 2011 - 11:26 AM
I have a GSS25PSMF BS GE Refrigerator with a CAN13 WR30X10012 (DR. NO. 200D1181g011) automatic icemaker.
The icemaker does not fill with water or harvest partial cubes that are already frozen.
When the freezer is warm after it has been off for a while, I turn on the icemaker and it spits out water for about half a second, then the rake spins around about 1 and 3/4 rotations and then the green light starts blinking.
When the freezer is cold and I turn on the icemaker, the rake spins around until it gets to the front and then stops (in its home position, I'm assuming), but then nothing ever happens. If there are small frozen ice cubes ready for harvesting (from when the water that spit out several times for half a second on previous tests), it never harvests them. It also does not try to fill the ice tray. It does not go into fault mode; it just sits there and does nothing.
Also, I've tested the valve using 110VAC and it works just fine (also I know it works fine because it spits out water for 1/2 second on a warm startup), so I know there's no clogged lines or anything like that (unless the inlet line is freezing...).
Any help would be appreciated!
Posted 18 February 2011 - 11:59 AM
Posted 19 February 2011 - 07:40 PM
At any rate, does anyone have a broken CAN13 icemaker that they'd be willing rip apart and sell me this part out of? I'll be happy to pay you $30 for it so I don't have to buy a new icemaker.
Posted 19 February 2011 - 07:44 PM
Posted 19 February 2011 - 09:47 PM
I just tested the icemaker with the part glued (very carefully!) back together and ice cubes are popping out and everything seems totally normal. So if anyone has an old CAN13 unit and is willing to sell me this part, I'd really appreciate it!
Posted 21 February 2011 - 12:37 PM
Posted 25 February 2011 - 02:05 AM
Does anyone have a GE CAN13 icemaker that they'd be willing to sell me this part out of?
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users