I have a Maytag Neptune MAH9700AWW front washer (Serial Number 116830786J) that has given me an error code 3E at the rinse/spin cycle. This was a small load of clothes. I removed the clothes, unplugged the machine; reset it to spin; the basket is trying to spin but it won't. I opened the back panel, checked for any loose wires and tried again - still won't spin.
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Maytag Neptune MAH9700AWW 3E code
Started by ciderzydeco, Feb 19 2011 04:43 PM
4 replies to this topic
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
Samurai Appliance Repair Man
-
- Fermented Grand Master
-
- 24,321 posts
Your Sometimes-Lucid Host
- Location: USA
- Flavorite Brew:Kirin Ichiban
Posted 19 February 2011 - 08:16 PM
Good topic on this at our old forum. Here's your personal invitation to it==> http://applianceguru...rum2/27027.html
Grok on that and post any followup questions here.
Grok on that and post any followup questions here.
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
#3
ciderzydeco
-
- Grasshopper
-
- 3 posts
Unsui
Posted 19 February 2011 - 11:28 PM
Thanks. 
I was able to find the tech manual on line. Went into Service Mode and performed both the Board Output Test and the Quick Spin test per the troubleshooting instructions. Both gave me the 3E error so I am not feeling too happy about this. 
I was able to find the tech manual on line. Went into Service Mode and performed both the Board Output Test and the Quick Spin test per the troubleshooting instructions. Both gave me the 3E error so I am not feeling too happy about this.
#4
ciderzydeco
-
- Grasshopper
-
- 3 posts
Unsui
Posted 20 February 2011 - 02:39 PM
Per your advice and the tech sheet, checked the ohms at the motor - they were in range. Couldn't get a readout at the control panel. When I reset everything, the motor is trying to spin the drum, but doesn't get the rpms.
#5
Samurai Appliance Repair Man
-
- Fermented Grand Master
-
- 24,321 posts
Your Sometimes-Lucid Host
- Location: USA
- Flavorite Brew:Kirin Ichiban
Posted 20 February 2011 - 05:54 PM
Okay, got shiny new pearl of wisdom for you to feast your Vulcan squinties on==> http://fixitnow.com/...ah9700-washers/
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
