Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      1  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Bosch 300 series dryer repair manual

cagaines

By cagaines
in Appliance Service Manual Requests Forum

 Share

Recommended Posts

cagaines Samanera

cagaines

Posted
Posted

Bosch 300 series dryer, Model # WTVC3300US/10 (FD9004) 302269

I’d like to learn how to remove the bottom front panel so I can easily clean the bottom of the lint screen port and exhaust duct. The problem is that the bottom of the duct collects debris/lint that the screen doesn’t catch. There is a sensor located in this area that needs to be cleaned occasionally and although accessible, it gets coated with lint and erroneously alarms and even shuts down the dryer down as a fire safety feature.

Link to comment
Share on other sites
  • Replies 9
  • Created
  • Last Reply

Top Posters In This Topic

  • burnsb

    4

  • RegUS_PatOff

    2

  • Samurai Appliance Repair Man

    1

  • cagaines

    1

Popular Days

Top Posters In This Topic

Popular Days

  • Team Samurai
Samurai Appliance Repair Man Sensei

Samurai Appliance Repair Man

Posted
  • Team Samurai
Posted

Ah, the Bosch "Vision" dryer. I PMed you the download link to the manual. The overall procedure is on pg 22 but it calls procedures from previous pages. Pretty easy to sing along. :whistling:

Link to comment
Share on other sites
  • 1 year later...
burnsb Unsui

burnsb

Posted
Posted

I have a WTVC3300US/10 that is not heating. I've visually inspecting the outlook and plug and I've reset the breaker, but I haven't tested the outlet. I've vacuumed out the dryer vent and the duct (they were pretty bad). Dryer is still not heating. I was planning on replacing the heating element, but I can't figure out how.

Link to comment
Share on other sites
RegUS_PatOff Sensei

RegUS_PatOff

Posted
Posted

... I haven't tested the outlet.

why not ?

should test for 120v & 240v at the Dryer Cord terminal Strip

Link to comment
Share on other sites
burnsb Unsui

burnsb

Posted
Posted

Ok, the terminal strip has a black wire terminal, a white wire terminal, and a terminal with a red wire and a brown wire. The voltages are:

Black to White: 116 VAC

Black to Red/Brown: 233 VAC

White to Red/Brown: 117 VAC

Link to comment
Share on other sites
burnsb Unsui

burnsb

Posted
Posted

I have a WTVC3300US/10 that is not heating. I've visually inspecting the outlook and plug and I've reset the breaker, but I haven't tested the outlet. I've vacuumed out the dryer vent and the duct (they were pretty bad). Dryer is still not heating. I was planning on replacing the heating element, but I can't figure out how.

I took the top of the dryer, but the heating element is not visible from the top. Can someone provide instructions? Thanks!

Link to comment
Share on other sites
  • 9 years later...
red chili time

red chili time

Posted
Posted
On 2/25/2011 at 9:50 PM, Samurai Appliance Repair Man said:

Ah, the Bosch "Vision" dryer. I PMed you the download link to the manual. The overall procedure is on pg 22 but it calls procedures from previous pages. Pretty easy to sing along. :whistling:

i'm seeing 500s and 600s but no service guide for the mtvc3300us10

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...