Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore (Whirlpool) Oasis HE washer 110.27062601 tech sheet

Waneewek

By Waneewek
in DIY Appliance Repair Help

Recommended Posts

Waneewek Kohai

Waneewek

Posted
Posted

I have a Kenmore Oasis washer Model # 110.27062601 that starts to work but stops after about 2 minutes of operation. The fill valve opens and water is entering the washer, but after 2 minutes it stops filling and just sits there. If I push the stop button once, the door should unlock so I could add more clothes, but it doesn't unlock. I push the stop button a second time and all of the lights go out, water doesn't drain and door doesn't unlock. After a couple of minutes go by the door eventually unlocks, but water still sits in the tub.

Can I get the the tech sheets for this model? And, if you have any thoughts on this problem they sure would be appreciated!

Thanks,

Wan

Link to comment
Share on other sites
  • Replies 2
  • Created
  • Last Reply
  • 3 weeks later...
Waneewek Kohai

Waneewek

Posted
  • Author
Posted

It must have been a loose connection in the control panel. I checked all of the connections (which seemed good) and put the washer back together and it has been working good since. :thanks:

Thanks for your help,

Wan

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...