Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Isn’t it time to know what you don’t know?

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
Sign in to follow this  
Followers 0
floatingboat

Frigidaire oven F30 error code

11 posts in this topic

Complaint is that I am getting an F30 err code on oven. Wasn't sure if it was just temp prob or board anyone seen this?

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

F30 ERR
If the EOC detects that the oven temperature probe circuit is OPEN during the initial power up
you will not be able to program the time of day and the EOC will display “F30 ERR”
and the alarm will sound when you attempt to set the time.

Part number: AP3363354

Part number: AP3363354

Share this post


Link to post
Share on other sites

Thanks reg. Sometimes the boards give me grief also.

Share this post


Link to post
Share on other sites

Sensor $ 23

Controller $ 210

you do the math :whistling:

Share this post


Link to post
Share on other sites

These are resettable, they are wired in series with the sensor and trip out during self clean. Located close to the area where the probe harness passes through the liner at back of oven. If you reset it, it may (likely) trip again during next clean - has been an issue, have placed thin washers under mtg screws and instructed user to move range out a few inches prior to cleaning. This mostly 'cause I hate callbacks

Share this post


Link to post
Share on other sites

These are resettable,

the Oven Sensor (thermistor) ?

Share this post


Link to post
Share on other sites

Oops! forgot to paste the picture of the thermodisc there, will post it now ............

 

Part number: AP3874781

Part number: AP3874781

Share this post


Link to post
Share on other sites

F30 ERR

If the EOC detects that the oven temperature probe circuit is OPEN

Share this post


Link to post
Share on other sites

Yes, the thermodisc is in series with the oven probe

Share this post


Link to post
Share on other sites

ahh, yes, now I see it

I think I need my eyes checked again

Share this post


Link to post
Share on other sites

Replace temp probe and checked all tstats. Call went fine. Thank you all for your input.

Share this post


Link to post
Share on other sites
Sign in to follow this  
Followers 0