72 replies to this topic

[kdblev]

oops....

 

serial number is: FH0806118

[Chat_in_FL]

Call it March of 1998, They changed the table somewhere along the line, but that should be in the ballpark...

[kdblev]

[user=8989]Chat_in_RI[/user] wrote:

Call it March of 1998, They changed the table somewhere along the line, but that should be in the ballpark...

 

thank you very much! i've been reading that many of these kenmore/whirlpool dishwashers have some big issues. do you happen do know off hnd if this one might fall into those categories?? i am debating whether or not to replace it before we sell our house. it is the only older appliance and i have never used it.

[Chat_in_FL]

[user=10884]kdblev[/user] wrote:

i am debating whether or not to replace it before we sell our house. it is the only older appliance and i have never used it.

I see no reason to get rid of it, if you never used it, it should be like new... Not in the serial number range of the major poblems.

[kdblev]

Thanks for all the help! I was mainly trying to make sure it wasn't one of those earlier recalled ones, since I had no idea when it had been bought. Had my husband check all the connections and ran it tonight and it seems fine. Thanks again.

[FixOrRepairDaily]

[user=0]Will[/user] wrote:

I have a kenmore model number 63016303400 and lost the manual. I'm trying to find it on line but so far no luck. Who makes this? I don't see 630 on your chart. Thanks.

This is a front loder washer ?

Made by Vanusi ? <- somthing like that. Italy

Anyway, very few parts are available if any.

Long gone ...

 

 

[Dan Webster]

 630.16303400 post it like this at sears web site and you will find out this is a sears kenmore dishwasher made by whirlpool.

 

[FixOrRepairDaily]

Current source 630 Dishwasher is BOSCH since around 1990.

In which case if you put the /UC number after the model it should come up.

Unless it is the first Bosch model ('91)with the controls on the top.

For some reasion you have to call and get the info. from either Bosch directly

or parts direct will look it up on film

Like this
630.16303400/uc     It comes up.

[Samurai Appliance Repair Man]

Hey, Applianceman, haven't seen you in a while. How you been, Budrow?

[Dan Webster]

as you may know I have been in process of packing up appliance parts store .its all done now all the parts are in storage and I am taking a little breather

[Samurai Appliance Repair Man]

Yeah, I know about those "breathers."



Enjoy! :tokin:

[Dan Webster]

:D

[Budget Appliance Repair]

Anyone know what Kenmore code: 693. is (Williams by anychance?)

It's a freestanding unvented gas heater: 693.358530

[Keinokuorma]

[user=1]Samurai Appliance Repair Man[/user] wrote:

Yeah, I know about those "breathers."

Hmm... what do you reckon, what kind of breath fresheners did the guys use, who made the Toxic Avenger movies?:D

[Samurai Appliance Repair Man]

[user=36]Budget Appliance Repair[/user] wrote:

Anyone know what Kenmore code: 693. is (Williams by anychance?)

I don't believe I've run across a 693 yet. Maybe I have but don't remember.

[Pegi]

Thought could tell by the part numbers, but do not recognize the part numbers source either...on the Sears site....

[Dan Webster]

willie can you take a picture of this heater and post it?

[Budget Appliance Repair]

The only picture I have is from the internet

http://cgi.ebay.com/NEW-KENMORE-UNVENTED-GAS-FURNACE-HEATER-11524_W0QQitemZ200040694177QQihZ010QQcategoryZ41987QQcmdZViewItem for the Ebay listing with a picture.

This auction seller is the same company that I orginally knew to have this heater, (without going thru the auction their normal price is only $110.00 + shipping).

This heater is unvented and uses the ODS, (oxygen depletion system), pilot. Only needs a gas line to hookup and operate.

Three postion gas valve, Off/Lo/Hi, 0/15000/30000btu - No t-stat.

I have a customer that is looking for a small cheap heater to heat just one room of the house, this is the best I could find so far.

Anyone here have any feedback on this??? $110.00 seems like a pretty good price, depending on how much shipping whould be to get it from Lebanon, IN to Eureka, CA.

I thought it appears to be a Williams, but like Pegi said, the part#'s on the Sears sites don't look like Williams part#'s, (I don't recognize them either).

[Dan Webster]

willie thats a good price and thats a nice heater. I have one and I also repair them

during the hotter months they tend to get dust in the pilot ods chamber which can be easily flushed with a little rust buster other than that they are fine heaters

[Budget Appliance Repair]

[user=4554]applianceman18007260692[/user] wrote:

willie thats a good price and thats a nice heater. I have one and I also repair them

during the hotter months they tend to get dust in the pilot ods chamber which can be easily flushed with a little rust buster other than that they are fine heaters

Thanks for the feedback ApplianceMan......

Do you know what kind of price these would have retailed for when new?????