Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

pjjp21

Maytag Washer model MAH3000AWW

6 posts in this topic

hi

my maytag will not spin.  everything else seems ok but when it gets to the spin cycle it just sit there...i checked the circuit board  r11, r43 and i belive Q6, all appear fine, nothing fried.....

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

Does the door lock light come on?  If so, then we need to check the voltage and continuity in the unbalance circuity.  Also wanna check the integrity of the connections on the machine control board.

If we need to get into the unbalance circuit, I'll need to see your tech sheet/wiring diagram.  Open the control panel and you'll find it inside.  Post it here or fax it to me at 775-416-4449.

Share this post


Link to post
Share on other sites

i be lieve i found the problem, it was the door lock spin enable switch, i am going to replace that, should i also replace door wax motor?

Share this post


Link to post
Share on other sites

If it's the original wax motor, it'd be a good idea to go ahead and replace it-- the wax motor was the culprit behind all the machine control board burnouts.

Share this post


Link to post
Share on other sites

i thank you for all your help, i will be adding to the beer fund!!!

Share this post


Link to post
Share on other sites

Mucho domos!  I appreciate your support!  :D

Share this post


Link to post
Share on other sites