hi
my maytag will not spin. everything else seems ok but when it gets to the spin cycle it just sit there...i checked the circuit board r11, r43 and i belive Q6, all appear fine, nothing fried.....
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Maytag Washer model MAH3000AWW
Started by pjjp21, Apr 25 2005 01:54 PM
5 replies to this topic
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
Samurai Appliance Repair Man
-
- Fermented Grand Master
-
- 24,296 posts
Your Sometimes-Lucid Host
- Location: USA
- Flavorite Brew:Kirin Ichiban
Posted 25 April 2005 - 02:07 PM
Does the door lock light come on? If so, then we need to check the voltage and continuity in the unbalance circuity. Also wanna check the integrity of the connections on the machine control board.
If we need to get into the unbalance circuit, I'll need to see your tech sheet/wiring diagram. Open the control panel and you'll find it inside. Post it here or fax it to me at 775-416-4449.
If we need to get into the unbalance circuit, I'll need to see your tech sheet/wiring diagram. Open the control panel and you'll find it inside. Post it here or fax it to me at 775-416-4449.
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
#3
pjjp21
-
- Merit Apprentice Appliantologist
-
- 13 posts
Samanera
Posted 25 April 2005 - 02:24 PM
i be lieve i found the problem, it was the door lock spin enable switch, i am going to replace that, should i also replace door wax motor?
#4
Samurai Appliance Repair Man
-
- Fermented Grand Master
-
- 24,296 posts
Your Sometimes-Lucid Host
- Location: USA
- Flavorite Brew:Kirin Ichiban
Posted 25 April 2005 - 02:50 PM
If it's the original wax motor, it'd be a good idea to go ahead and replace it-- the wax motor was the culprit behind all the machine control board burnouts.
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
#5
pjjp21
-
- Merit Apprentice Appliantologist
-
- 13 posts
Samanera
Posted 25 April 2005 - 02:52 PM
i thank you for all your help, i will be adding to the beer fund!!!
#6
Samurai Appliance Repair Man
-
- Fermented Grand Master
-
- 24,296 posts
Your Sometimes-Lucid Host
- Location: USA
- Flavorite Brew:Kirin Ichiban
Posted 25 April 2005 - 02:54 PM
Mucho domos! I appreciate your support! :D
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
