Fisher and Paykel error codes for model LW095AU?
Posted 19 October 2005 - 02:20 PM
Posted 21 October 2005 - 09:31 AM
Press and hold the WASH TEMP DOWN the press the POWER button. The machine will give two short beeps. When you press the SPIN SPEED UP button until the HOLD and SLOW SPIN LED's are on, the WASH PROGRESS LED's will display the fault code. Post the on/off pattern and we will try to help.
Posted 21 October 2005 - 03:53 PM
off off on off on off on on
In diagnostic mode the 2 led's above long was and 2 led's above short wash on.
on on off on on off off off
Email firstname.lastname@example.org any help would be great. Thanks Riki
Posted 21 October 2005 - 05:42 PM
I had the same pattern with error when not in diagnostic mode. Also symptom that the fill solenoid was was pulsing on and off. I have been told this is error 43, out of balance. The out of balance switch fails often on these. I have fixed a few other machines by cleaning/replacing this switch which is located under the control module, operated by a lever that hangs down just outside the bowl. In simple cases the machine will go for a while just with a wiggle of this lever but replacing the switch is best.
Posted 24 October 2005 - 12:29 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users