Kitchen Aid K45 stand mixer speed control
Posted 25 April 2005 - 08:38 PM
I have inherited a suberb Kitchen Aid K45 that has the niggling problem of either being off or going full tilt. :( Being a strong advocate of the three R's (Recycle, Repair and Reuse) I believe the misguided unit is worthy of our attention. I've taken the motor head apart as far as I can without any beer on board...that is to say not very far...just the back cover. It looks like the orbital gear head will need to come off before the motor can be removed to expose the switch mechanism. It also appears there is a micro switch that supplies the ON/OFF function and the speed lever on the outside runs some sort of rheostat that controls the motor RPM.
If you would be so kind as to enlighten me, is this problem something that you've dealt with in the past? Is it possible to repair the unit and still keep the suds-o-meter at 1 or under? Any enlightenment would be most appreciated. :)
Posted 01 May 2005 - 08:17 PM
I've tried looking up switch parts for this unit, but the parts search engine on this site doesn't include a category for stand mixers under Kitchen Aid. Is it possible the parts might be listed under another manufacturer?
Posted 02 May 2005 - 05:37 AM
Kitchenaid Model 4 Mixer
Disassembling a Kitchenaid Model 4 Mixer
Kitchenaid Standing Mixer Model KSM90
Posted 05 June 2005 - 08:15 PM
The motor head is laying upside down in this picture. The capacitor (enclosed in the cardboard tube) is actually at the top of the opening when the cover is taken off. The Whirlpool part number for the capacitor is 4160325.
Posted 06 June 2005 - 08:01 AM
If we helped you kick some appliance bootay and saved you some coin, consider helping' us keep the lights on ==> http://beer.fixitnow.com
Are you a Master Appliantologist? ==> http://appliantology...ppliantologist/
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users