Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Manual Request Maytag SxS MSD2756GEW


Appliancejack

Recommended Posts

I been working on this Maytag SxS fridge and the evaporator was frozen from about middle to the top, just under the Evap fan. I tried forcing it into defrost by the light switch and also jumpering L1 to heater on the board. I got nothing either way. I even bypassed the defrost thermostat and still nothing. I ran into this same problem with a Kenmore SxS last week. I had the manual and did exactly what it said and the display would say it was in defrost, but it wasn't defrosting and that's with the def stat bypassed also. Both of these units had brand new boards and heaters checked out. I'm going a little crazy here.

Link to comment
Share on other sites

  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • RegUS_PatOff

    1

  • Appliancejack

    1

Popular Days

Top Posters In This Topic

16010154 MSD.pdf

Older ADC's ... momentarily Jumper L1 to TEST on the ADC Board.

You may have the "newer" version of the Maytag ADC

which don't have L1 and TEST

To enter Defrost Mode, cycle the Freezer Cold Control ON / OFF 3 times within 6 seconds, then leave on max cold.

Link to comment
Share on other sites


×
×
  • Create New...