GE Profile Dishwasher PDW9280J03SS, removing main filter
Posted 15 May 2011 - 08:42 PM
Posted 20 May 2011 - 11:13 AM
The nut hub can be removed by rotating it counterclockwise.
Caution: Be careful not to break the clip on the hub when removing the main conduit from hub.
From there, the fine filter can be removed.
Posted 21 May 2011 - 10:12 AM
Posted 25 May 2011 - 09:45 AM
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
Posted 26 May 2011 - 10:21 AM
Posted 01 June 2011 - 06:32 PM
Posted 08 June 2011 - 09:12 AM
dwasher.jpg 173.24KB 16 downloads
Posted 09 June 2011 - 02:44 PM
As far as removing the steel mesh, which is the coarse filter, I don't think there's a way to remove that; I think it's part of the factory-assembled basin.
Posted 09 June 2011 - 03:35 PM
Posted 19 August 2013 - 05:04 PM
Hello...it's been 2 years now and the ol' dishwasher has been working pretty well. I have to clean gook out of the sump occasionally, and I regularly check the spray arms to keep the holes unclogged. I never did replace that flapper valve, but now dishes are staying gritty despite my vigilance. I am going to order one of those valves, but would like some guidance as to how to replace it. I haven't dug into the guts of the dw past getting my fingers down into that sump. Will I need to get underneath or behind the dishwasher to do this? Also, are there any other parts that commonly wear and which should be replaced while I have it apart? I am hoping to keep it for a few more years. Thanks!!!
Posted 19 August 2013 - 07:51 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users