Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn how to be your own tech line…

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
bmmc

kitchenaid defrost cycle

3 posts in this topic

how do i force the adc board into the defrost cycle?

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

gallery_4_2_39936.png

FYI - this info is on the tech sheet supplied with every fridge, which is wadded up and tucked into a crease on the back of the toe grill. Should always go by the tech sheet because procedures vary widely. Tech sheets trump service manuals, too.

Share this post


Link to post
Share on other sites

STEPS TO ENTER ELECTRONIC DEFROST CONTROL TEST MODE (IF APPLICABLE)

OPTION #1 STEPS (BI·METAL CLOSED):

#1 - POWER OFF TO REFRIGERATOR FOR AT LEAST 30 SECONDS

#2 - THERMOSTAT OFF

#3 - POWER ON TO REFRIGERATOR

OPTION #2 STEPS (BI-METAL CLOSED)

#1 - THERMOSTAT OFF 15 SECONDS

#2 - THERMOSTAT ON 5 SECONDS

(REPEAT STEPS 1 AND 2 TWO MORE TIMES)

#3 - THERMOSTAT OFF

ENTER TEST MODE

IN 3-8 SECONDS, CONTROL WILL TURN ON DEFROST HEATER.

DEFROST HEATER WILL TURN ON FOR 18 MINUTES OR UNTIL BI·METAL OPENS.

TO TERMINATE TEST EARLY, REMOVE POWER FROM REFRIGERATOR.

NOTE: IF OPTION #2 DOES NOT WORK, TRY OPTION #1 BEFORE REPLACING CONTROL.

ALWAYS CHECK CONNECTIONS BEFORE REPLACING CONTROL.

HELPFUL HINT: UPON ENTERING TEST MODE, A RELAY TURNS OFF THE COMPRESSOR AND TURNS ON THE DEFROST HEATER.

LISTEN FOR THE RELAY TO CLICK.

IF RELAY CLICKS ONCE UPON ENTERING TEST MODE, CHECK FOR DEFROST HEAT.

IF RELAY CLICKS TWICE (ALLOW UP TO 30 SEC BETWEEN CLICKS), CHECK FOR BI·METAL OPEN.

* * IF BI·METAL IS BY·PASSED FOR TESTING (IF APPLICABLE), DO NOT OVERHEAT EVAPORATOR AREA.

Share this post


Link to post
Share on other sites