DD603 has new top lid and still does not seal fully at top right front. Drawer locks but leaks over control panel. How do I check operation of pull down motors with drawer out??
Pete
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
DD603 Fisher Paykel dishdrawer
Started by pete, May 22 2011 07:23 PM
1 reply to this topic
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
DADoESTX
-
- Chief Master Appliantologist
-
- 260 posts
Kohai
- Flavorite Brew:Iced tea with a spike of earl grey
Posted 22 May 2011 - 11:11 PM
Diagnostic Mode.
With Power off, press/hold Keylock, then press Start/Pause at the same time for 5 seconds. Release the buttons when it powers-on.
Press Power once.
LCD says "HO" (hardware output), and/or all cycle selection LEDS are on.
Press Start/Pause repeatedly (three times from the start) until LCD says "Ld" and/or Delicate & Rinse cycles are lit. *Various components/functions can be tested by pressing Start/Pause to select.
Press Keylock to operate the selected function. Lid motors will operate for 10 seconds to lower or raise each time Keylock is pressed.
Press Power to exit when done.
*Er or Delicate - heating element relay -- DO NOT leave it on for more than a few seconds without water in the tub or the temp high-limit fuse on it may blow
With Power off, press/hold Keylock, then press Start/Pause at the same time for 5 seconds. Release the buttons when it powers-on.
Press Power once.
LCD says "HO" (hardware output), and/or all cycle selection LEDS are on.
Press Start/Pause repeatedly (three times from the start) until LCD says "Ld" and/or Delicate & Rinse cycles are lit. *Various components/functions can be tested by pressing Start/Pause to select.
Press Keylock to operate the selected function. Lid motors will operate for 10 seconds to lower or raise each time Keylock is pressed.
Press Power to exit when done.
*Er or Delicate - heating element relay -- DO NOT leave it on for more than a few seconds without water in the tub or the temp high-limit fuse on it may blow
Recent blog entries on this topic
How to enter diagnostic mode in a Fisher-Paykel DD603 dishdrawer
By Samurai Appliance Repair Man in Samurai Appliance Repair Man's Blog, on 23 May 2011 - 08:22 PMDiagnostic Mode.
With Power off, press/hold Keylock, then press Start/Pause at the same time for 5 seconds. Release the buttons when it powers-on.
Press Power once.
LCD says "HO" (hardware output), and/or all cycle...
Read Full Entry →
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
