Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact


DD603 Fisher Paykel dishdrawer

2 posts in this topic

DD603 has new top lid and still does not seal fully at top right front. Drawer locks but leaks over control panel. How do I check operation of pull down motors with drawer out??


Share this post

Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

Diagnostic Mode.

With Power off, press/hold Keylock, then press Start/Pause at the same time for 5 seconds. Release the buttons when it powers-on.

Press Power once.

LCD says "HO" (hardware output), and/or all cycle selection LEDS are on.

Press Start/Pause repeatedly (three times from the start) until LCD says "Ld" and/or Delicate & Rinse cycles are lit. *Various components/functions can be tested by pressing Start/Pause to select.

Press Keylock to operate the selected function. Lid motors will operate for 10 seconds to lower or raise each time Keylock is pressed.

Press Power to exit when done.

*Er or Delicate - heating element relay -- DO NOT leave it on for more than a few seconds without water in the tub or the temp high-limit fuse on it may blow

Share this post

Link to post
Share on other sites