Maytag Neptune Washer MAH55FLBWW Valves are Good but No Water
Posted 25 May 2011 - 06:37 PM
Washer acts like it's washing with no water. I tested the hot and cold valves.
Manually put 110 vac to the hot and cold valves and they did fill the tub.
I am stumped as to what the problem is.
The touch control acts fine, responding to all the commands.
Can someone lead me in the right direction?
Posted 25 May 2011 - 07:27 PM
check the voltage for the Water Valves at the Controller
Hot P7 pin 1
Cold P7 pin 2
DIYers: Save time and money by learning the secrets of appliance repair... Click Here!
Posted 26 May 2011 - 07:05 AM
Do I put my other lead on P1 pin 1 or P5 neutral. Sorry, I am not sure how to test this board.
Thanks in advance for your help!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users