Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

  • Announcements

    • Samurai Appliance Repair Man

      ***READ THIS PRIOR TO STARTING A NEW TOPIC***   05/02/2016

      Topics with the complete and accurate model number in the topic title will get priority attention. You can validate your model number by entering into the form on this page: http://www.repairclinic.com/?clearLs=true For more help on using Appliantology effectively, please see this page:  
recap

Older Maytag Gas Dryer K System coils

8 posts in this topic

In the fixitnow Web Site it mentions testing coil activation with test cord . How is this done? Thanks.

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

... it mentions testing coil activation with test cord .

for Dryers ?

where does it mention that ?

Share this post


Link to post
Share on other sites

Yes. For gas dryer valve solenoid coils. I will go back and try to find it.

Problem is igniter lights then clicks off after 15 seconds.

I touched a small screw diver to top of Secondary coil felt magnet attraction but nothing on Booster/Holding. I'm assuming coils not being energized.

Share this post


Link to post
Share on other sites

Has this Dryer worked OK up till now at this location ?

Has it been in storage for any length of time ?

Share this post


Link to post
Share on other sites

Dryer has always worked and has never been stored.

On Fixitnow site. FAQ Section. 'Gas Dryer Runs But Won't heat up." part of reply reads. " Check valve resistance. You may also need to activate each valve with a test cord....."

Share this post


Link to post
Share on other sites

On Fixitnow site. FAQ Section. 'Gas Dryer Runs But Won't heat up." part of reply reads. " Check valve resistance.

You may also need to activate each valve with a test cord....."

I don't think Dryer Coils can be tested with a "test cord"

but they do get weak and sluggish . . . won't work when warm.

Ignitor will repeatedly cycle without the Gas Valve opening.

Older Maytag Gas Dryer K System coil

Share this post


Link to post
Share on other sites

Good catch, Reg. I figured since he didn't include his model number, he didn't mind about getting the wrong part. :argh:

Share this post


Link to post
Share on other sites