Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

ruud rooftop package

skjch

By skjch
in DIY Appliance Repair Help

Recommended Posts

skjch

skjch

Posted
Posted

I have a ruud rooftop package. The main burners do not light. Pilot and spark comes on, then off, then repeats, but no burners. Blower does come on as well. the unit is 25 years old, but label is long gone. where else can I get model #. Thanks

Link to comment
Share on other sites
  • Replies 2
  • Created
  • Last Reply
RegUS_PatOff Sensei

RegUS_PatOff

Posted
Posted

. . . label is long gone. where else can I get model #. Thanks

I'm not a HVAC master, but a few picture (links) of the Controls, etc, may help the Masters
Link to comment
Share on other sites
applianceman18007260692 Sensei

applianceman18007260692

Posted
Posted

Make sure you have a good ground from pilot to control. Use some sand cloth to clean the Kanthal spark ignitor. It does 2 things. It lights the pilot AND verify's to the control the flame is lit.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...