Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

  • Announcements

    • Samurai Appliance Repair Man

      ***READ THIS PRIOR TO STARTING A NEW TOPIC***   05/02/2016

      Topics with the complete and accurate model number in the topic title will get priority attention. You can validate your model number by entering into the form on this page: http://www.repairclinic.com/?clearLs=true For more help on using Appliantology effectively, please see this page:  
nokaoi

Admiral Frig NT17D4VA freezer fan not operating

3 posts in this topic

I have a Admiral NT17D4VA refigerator that was in a rental house of mine for 8 years. The latest tenets informed me that the frig had not been cooling properly for a while and now did not cool at all. I picked up the frig and brought it back to my house. After extensive cleaning of the condensor coils and sucking out a ton of dust, dog hair, etc. I plugged the frig in. The compresssor and condensor fan came on, but when I opened the freezer I noticed the the freezer fan was not running. I have tried to figure out how to gain access to the fan to pull it, check for voltage and bench test, however, there does not seem to be a way to gain access even though I know that there has to be a way. What is the procedure to gain access to the freezer fan on this model? Any help would be greatly appreciated. I'm crossing my fingers that the fan is the problem and not a weak compressor or some other terminal illness.

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

Couldn't find anything with that model number; it's either too old or it's the wrong number.  No matter...

To take apart the freezer, you have to remove the doors and door hinges.  The freezer bottom panel can then be lifted up and you have access to fan. 

admref8.jpg?dc=4675425985522932942

You should check the continuity of the fan motor as well as verify the voltage going to the motor.  You may also find the fan blade stuck by ice.

Share this post


Link to post
Share on other sites

And one other word of warning....keep some of your blood handy at the local hospital, that evaporator has razor blades on it:yikes:. Seriously.

Share this post


Link to post
Share on other sites