Miele Dishwasher G1470
Posted 23 June 2011 - 03:34 PM
But its not normal and so, ahem, likely to get worse or do some attendant damage. It sounds like a piece of plastic grocery bag or cling wrap spinning really fast and hitting something fixed for the "tick,tick,tick,tick" about 4-8x/sec.
It occurs at the very beginning and end of the entire cycle. It also occurs once or twice during the cycle. I presume during a purge/drain effort. With the kickplate removed I can't see anything easily serviceable. I've removed the triple fillter system -- it was pretty much clear, cleaned replaced and
the noise remains. Went a little deeper to the non-return valve. removed that and cleaned it. no change. when I removed the non-r valve a nice spurt of water came out but apparently no harm/foul.
Also, the small impeller propeller that is exposed when the non-r valve is removed does _not_ spin freely -- it will rotate in either direction less than one full revolution.
I've found the G1000/2000 pdf. Thanks! I'm not going near disassembly of the pump/drain without exhausting more/easier things. I just don't think this is a piece of clingwrap -- given that it probably would've totally bollocks'd the works if it had entered from inside the cleaning chamber. So, any ideas or directions anyone can point me in?
Posted 03 July 2011 - 09:21 AM
have to be removed in order to remove the debris.
If not removed it will most likely end up damaging
the drain pump if it hasnt all ready.
One on one repair help now available !
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users