Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Replacement for A.O. Smith FSG 40 222?

JJVBVA

By JJVBVA
in DIY Appliance Repair Help

Recommended Posts

JJVBVA

JJVBVA

Posted
Posted

My 86yo mother was told she needed to replace her 17yo A.O. Smith FSG 40-222 (LNG) water heater because it is leaking. Was quoted $2K for a 50 gallon replacement. Not sure brand or whatever. Fact is she doesn't need the Cadillac. 40 gallon is fine. Only two people in the house. Does anyone know of models of a similar size that I could throw in there with minimal (ideally) no modifications? Not looking to spend a fortune, prefer something that is good for under $500 and readily available. Thanks.

Link to comment
Share on other sites
  • Replies 2
  • Created
  • Last Reply
JJVBVA

JJVBVA

Posted
  • Author
Posted

Thank you. I will be able to get exact specs off the existing one later today so I can match up the replacement better. I spent some time searching unsuccessfully for specs on the existing unit on the internet. I've not done one of these before but it looks pretty straightforward. Just trying to minimize making mods. Primarily would like to keep the exhaust and gas line intact. Plumbing is not a big issue if I need to change them a bit.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...