Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Ecowater ERO-R450E RO system

HeidiBeal

By HeidiBeal
in DIY Appliance Repair Help

Recommended Posts

HeidiBeal

HeidiBeal

Posted
Posted

We've had this unit 2 years and it has begun to leak from a couple different places in the housing. One place is an opening on top of the unit (postfilter end) within the wire strain relief. No idea what the purpose of this opening is. The other place it leaks is the seam along the back of the unit where the hanger bracket fuses to the body of the housing. I've disconnected the in and outflow tubes, examnied the auto shutoff assembly, replaced evey o-ring in those. It seems to leak only after the system has pressurized awhile . The housing has no sign of cracks or other wear. It must be coming back up through one of the sumps? I checked the collets and o-rings in the tubing. Didn't replace those o-rings..they looked fine and seems like if one them is letting water pass, I would see the leak coming from that port.

Link to comment
Share on other sites
  • Replies 1
  • Created
  • Last Reply

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...