Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Dehumidifier Life Span


Jerseyfix

Recommended Posts

After trying to repair my whirlpool dehumidifier I determined with some great help from this site that the compressor is shot. I have ordered a new one to replace it. Is there anything that can be done to help maintain the life of one of these machines? I know keeping the filter is clean. I read somewhere that operating the fan at the highest setting will help maintain the life of a dehumidifier.Any truth to that? Thanks

Link to comment
Share on other sites

  • Replies 2
  • Created
  • Last Reply

Ignoring the fact that most everything is built like crap these days...................

The idea of prolonging the useful like of a dehumidifier by running the fan at a higher speed is kinda , well stupid. The point is for this device to dehumidify right? The most dehumidifing is done when you have a very cold evaporator coil. That is done by passing the smallest amount of air over the coil without it actually freezing up . COLDER coil = more humidity removed.

So we can assume that if there were a device who's whole purpose in life was to suck moisture out of the air , then maybe it was engineered , built and intended to operate at a very low coil temp with a low fan speed. My guess is the higher speeds are for those people who want to use the device as some sort of room fan.

Wait!! we are back to things being built like crap.... The device was intended to work at a low fan speed , if it did not last , It may have been flawed to start off with.

OR you may have just let it get too dirty and it is all your fault it broke. Hard to say................. I would go with flawed product if I were you .

Seriously, Just keep the evaporator/ condenser coil and all fans clean . It is as simple as that. nono.gif

Link to comment
Share on other sites

I have to agree with your assessment that these things are just junk. I am wondering has the ending of freon as the refrigerant made these things die sooner? But then if that's true would not refrigerators have the same problem? Seems like if there is a consistent problem with the compressors across all brands then something with that part has changed.am I right?

I am just ticked that I have to replace this thing every few years. I'm seriously considering a whole house unit the next time.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...