Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

  • Announcements

    • Samurai Appliance Repair Man

      ***READ THIS PRIOR TO STARTING A NEW TOPIC***   05/02/2016

      Topics with the complete and accurate model number in the topic title will get priority attention. You can validate your model number by entering into the form on this page: http://www.repairclinic.com/?clearLs=true For more help on using Appliantology effectively, please see this page:  
daredman

Maytag Neptune Dryer MDE5500AYW

2 posts in this topic

I read the previous post, below, ordered the drum rollers and glide bearings, and replaced them but the squealing is still present.

http://applianceguru.com/view_topic.php?id=17340&forum_id=2

What I've identified is the right post that holds the right drum rollers has a small about of black build up on it and below in the basin of the dryer I can see some shavings on the floor. Also inside the spindle if the drum roller, where it rides on the post, I can see this black buildup as well. I started a cycle and watched the roller, it would stop intermittently, thus causing the loud squeal over and over again. So I sanded the inside of the roller as a test and sanded the post as well until all were clean then repositioned - ran a cycle and it was perfect. The next day the squeal was back. So I wanted to know if it's safe to put some kind lubricant on the post or is that a bad/dangerous idea. I noticed the heating element is directly below which concerned me with any kind of dripping and fire. Is the post difficult to replace if I have to?

Thanks

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

You'll have to replace the post OR you can try loosening the post and giving it a half turn so the bad spot is on the bottom. The hard surface has worn off. I would replace the post but it's up to you. Click this for your part. http://www.repaircli...3129480/1480353

Edited by SANTA

Share this post


Link to post
Share on other sites