Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. 
      I'll be posting a couple more tech sheets before Saturday so be sure to follow this event to keep up with the tech sheets we'll be going through. 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

A. O. Smith FPSH50 won't stay lit


mosleyh

Recommended Posts

Woke up to lukewarm water this morning.

I have an A. O. Smith FPSH 50 gas water heater that may be up to 10 years old.

If I power cycle the exhaust blower, it will start, the water heater will light, stay lit for about 30 seconds, then shut off.

The blower then completes its cycle (about another minute) and it shuts off too.

Any idea where I should start trying to troubleshoot this?

Thanks in advance.

Link to comment
Share on other sites

  • Replies 1
  • Created
  • Last Reply

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...