We have a Kenmore Elite side by side (model 106.50592003). Yesterday there was water in front of it. We opened the freezer door and found water all over the place. It looked a water supply line had broke, but there was no running water. I soon determined the icemaker wasn't working. After some research I did one suggested test, but can't remember which one it was. On that test the infrared receiver sensor blinked two or three times, but quit blinking after the first round of blinks. I think it was two blinks.
I also tried another test (see attached picture) where you jumper the thermostat and go through the various steps and then view the status LED code, which was a solid light for five seconds. And, what was funny when I did the test is that the injector bar did move, but when I pulled out the jumper before the ejector blades reached the 10:00 o'clock position there was no water fill which there should have been.
Any help someone can give will be greatly appreciated.
Thanks in advance.