Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

  • Announcements

    • Samurai Appliance Repair Man

      ***READ THIS PRIOR TO STARTING A NEW TOPIC***   05/02/2016

      Topics with the complete and accurate model number in the topic title will get priority attention. You can validate your model number by entering into the form on this page: http://www.repairclinic.com/?clearLs=true For more help on using Appliantology effectively, please see this page:  
skenig

Magic Chef CGR3740ADH stove convert to natural gas locate orifice hoods

7 posts in this topic

Hi,

I need to convert a Magic Chef (Maytag) CGR3740ADH gas stove from LP to natural gas. The manual I have mention

1. to change the pressure regulator settings. It is easy to locate at the back of the stove and the conversion is no problem.

2. to "screw the burner orifice hoods away from the pins, approximately 1 1/2 to 2 turns".

3. to adjust the burner air shutter to the widest opening.

1 and 3 are no problem but 2 is.

I think I might be able to "screw the burner orifice hoods away from the pins, approximately 1 1/2 to 2 turns" if I knew where these "burner orifice hoods" are located. The manual does not give any hint about actual location.

The stove has sealed top burners, that I could remove with a boa wrench. I think the top "orifice hoods" maybe under the top burners, but I want to make sure before I start taking the stove apart.

I understand there is one "orifice hood" per top burner, plus one for the broiler and one for the oven burner.

Thanks!

PS: Just out of curiosity, what would happen if the regulator is set for natural gas, the stove is connected to natural gas, and the "orifice hoods" are tight against the pins? a low flame? no flame at all?

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

from16010161.jpg

Share this post


Link to post
Share on other sites

Thanks, RegUS, but that does not say where the orifice hoods are located, which is what I am trying to find.

Share this post


Link to post
Share on other sites

on each Burner .. that's where the Gas comes out

Oven Orifice shown:

from16010161a.jpg

Share this post


Link to post
Share on other sites

The stove burner orifice hoods are located underneath the sealed burners. Behold:

20111005-t9xxe71aqbx1k5aq346bn8kq2h.png

You can get a closer look at them here ==> http://www.repaircli...mber=CGR3740ADH

Share this post


Link to post
Share on other sites

Many thanks! Once I located the orifice hoods, it was easy to untighten them , and now I have a beautiful big blue flame!

I bow to your knowledge, wise Fermented Grand Master.

Share this post


Link to post
Share on other sites

Blue Flame = Green future

Share this post


Link to post
Share on other sites