Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore 795.75283401


fixit guy

Recommended Posts

This is a LG refrigerator. It will run for a few days and shut down with the display scrolling. The customer can unplug and replug and unit start up and cool for a few more days. The diagnostics passed all tests. Changed the control board and same thing just not near often. Is there anything I am missing here or is this frig haunted? What will make it shut down and not restart? Any help here guys will be appreciated.

Thanks

Fixit Guy........

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • fixit guy

    3

  • RegUS_PatOff

    1

  • DurhamAppliance

    1

Popular Days

Top Posters In This Topic

... shut down with the display scrolling. .....

what does it "scroll" ?

similar to

LRBN20525xx_Service_Manual.pdf

link PM'd

Link to comment
Share on other sites

There is lights that scroll across the display. Just blinking lights.

Thanks for the reply Regus its been awhile since I have been on here and it is good to see you still here.

Link to comment
Share on other sites

Not sure...wild guess but I'll give it a shot anyway.....maybe bad overload protector and make sure compressor isn't running too hot ie bad fan/ dirty condenser.

Link to comment
Share on other sites

It sounds like it is going into the demostration mode accoring to the manual. Maybe something in the door holding the keypad down?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...