I have drawn much wisdom from this forum when I repaired my Model LSQ9244EQ0 Whirlpool . I have aquired a Kenmore model #110.20912990 + to my great pleasure it appears to be a newer model of my whirpool,
Is there a direct cross reference number from the Kenmore to the Whirlpool ?
The reason I aquired this is apparently the motor just hums. That is what the person I got it from said. He pulled the motor from the washer + decided it would be easier to just get a new one. To my benefit.
My Whirlpool had some issues recently ( Look for my other post about a leaking pump and maybe screwing the pooch when I jumpered the lid switch to test for leak, my bad.)
I have checked the capacitor + it seems it's bad.(Checked with a VOM.) Almost no deflection on the meter. The start cap for this and my old washer part numbers don't match. Have not checked the mfd value on my old one. So can't rob Peter to pay Paul / if your not familiar with the term your way younger than I / look it up ! Ha !
I would like to check the motor windings to determine they are OK before I pop for a new start capacitor. ( Nothing on the motor burned and all looks OK)
I'm in the swim pool industry / (30 + yrs) and have rebuilt lots of pool motors + am familiar with what connecters to check on them to determine if there is an open lead or correct resistance per wire leg.
Can someone here instruct me on the procedure to check the washer motor or where to find this info?
My experience with Kenmore equip is it's difficult to find repair info available thus wanting the whirlpool link,
Thanks in advance for any assistance . I will drink a toast to your health.