Jump to content


Use this Search Box to Find Appliance Repair Help Now
Need help finding your model number?
365-day return policy on all parts purchased here, even electrical parts that have been installed!


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource for DIYers!

The world-famous Samurai Appliance Repair Forums


You can post a question and get repair help for FREE! Click here to get started.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

Conversion to ERC #WB27T10327

WB27T10327 GE wall oven electric

  • Please log in to reply
13 replies to this topic

#1 mshope

mshope

    Samanera

  • Grasshoppah
  • Pip
  • 5 posts

Posted 14 October 2011 - 04:14 PM



I just replaced my ERC Model #JRGS14GET with the alternative ERC #WB27T10327. I only have wires For G, Neu, L1, and Broiler. I do not have a wire that will go
into L1A that is located in the relay. The oven control panel is powered on but the oven function will not heat up. How should I resolve this?



Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#2 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 14 October 2011 - 05:19 PM

Oven model number ?
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#3 mshope

mshope

    Samanera

  • Grasshoppah
  • Pip
  • 5 posts

Posted 14 October 2011 - 05:32 PM

The model is #JGRS14GEV1BB. I mistakenly put the wrong part number. The part number I replaced was #WB36K5130.

#4 Samurai Appliance Repair Man

Samurai Appliance Repair Man

    Shōgun

  • Master Samurai Tech
  • 29,053 posts
  • Location: USA
  • Flavorite Brew:Sapporo Original Draft Rice Lager

Posted 15 October 2011 - 09:12 AM

The new ERC should have come with an instruction sheet. Can you scan and post that? Or, if it's easier, you can fax it to me at 866-315-4504.

#5 Budget Appliance Repair

Budget Appliance Repair

    Sensei

  • Appliantology Fellow
  • PipPipPipPipPip
  • 4,720 posts

Posted 16 October 2011 - 05:08 AM

Most likely a jumper wire should be piggybacked from L1 to L1A on top of the relay to send L1 power leg to relay and then onto the bake/broil igniter when the relay closes.

Edited by Budget Appliance Repair, 16 October 2011 - 05:12 AM.

William Burk (Willie)
Willie's Budget Appliance Repair
Eureka, CA 95501

#6 mshope

mshope

    Samanera

  • Grasshoppah
  • Pip
  • 5 posts

Posted 19 October 2011 - 06:28 PM

I read a previous discussion a few days ago with the same solution, Sensei. I have never down this before. How would I go about it?

#7 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 19 October 2011 - 07:34 PM

can you post a picture (somewhere) of your new Controller with the wires connected ?
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#8 mshope

mshope

    Samanera

  • Grasshoppah
  • Pip
  • 5 posts

Posted 20 October 2011 - 11:37 PM

Here is the image. As you can see, I believe I need to have the L1 wire also go to the L1A found in the relay. I have never split a wire to hit two components. Know any links to tell me how to do this?

Attached Files



#9 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 21 October 2011 - 12:05 AM

Did the kit come with this Black Wire ?
Can you post a close-up picture of each end of that Wire ?
Did you need to use it ?
If not needed, does either end fit onto L1A ?
If yes, you could then cut the Black Wire and the Wire going to L1,
and use one of the Wire nuts to twist all (3) ends together.
Posted Image
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#10 Chat_in_FL

Chat_in_FL

    Sensei

  • Appliantology Fellow
  • PipPipPipPipPip
  • 1,291 posts
  • Location: USA
  • Flavorite Brew:on the house...

Posted 21 October 2011 - 04:43 AM

Here is the image.


Image shows White wire on L1 and Black wire on Neutral, Seems backwards by standard color codes...
We, the unwilling, led by the unknowing, are doing the impossible for the ungrateful. We have done so much, for so long, with so little, we are now qualified to do anything with nothing.

Mother Teresa

#11 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 21 October 2011 - 09:16 AM

... Seems backwards by standard color codes...

aahhh, yes , didn't notice ..
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#12 mshope

mshope

    Samanera

  • Grasshoppah
  • Pip
  • 5 posts

Posted 21 October 2011 - 11:13 AM

Switched those two around and still got nothing. I placed the wiring as it was in my previous ERC. I may have unintentionally did that when we were trying to move things around to try to get it to start after the first time it didn't work. Here is a link to the previous discussion I spoke of: http://appliantology...h__1#entry87656

The conclusion they came to was to jumper the L1 wire to go to both the L1 and L1A, so I'm taking it to be my solution too. Just got to figure out how to do that.

The black wire was just a ground wire. Do you still want the picture?

Thanks for sticking with me, guys. Just a 25-year-old girl trying to figure out how to wire her oven. :o)

#13 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 21 October 2011 - 01:38 PM

... The black wire was just a ground wire. Do you still want the picture?

no, ... it may not be ":big enough" to use for the L1A
I'll do some searching for an alternate wire / adapter
.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#14 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 23 October 2011 - 11:41 AM

OR
you would need one of these adapters:


 


pRS1C-2266043w345.jpg

along with:

http://www.repaircli...R=154&N=1057763

 

01025606.jpg

I'm not sure if the Connect sizes are correct


.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw





Also tagged with one or more of these keywords: WB27T10327, GE, wall oven, electric

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."

The Appliance Guru | AppliancePartsResource.com | Samurai's Blog

Real Time Analytics