Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Fisher paykel intuitive dryer DEIX2, fault codes service manual and schematic desperately needed!


robertparker

Recommended Posts

Oh most venerable one, please if you would, open my eyes to the baffling wonder of this machine. Machine gave fault 6, now giving fault 12.

Link to comment
Share on other sites

Fault Code 6 Door Jammed – (User Warning).

The door is unable to close due to either clothes catching or an excessive closing load.

Remedy: (1) Remove the obstruction.

(2) Reposition or remove some of the load.

(3) Fix the cause of binding in the door closing mechanism.

(4) Replace the motor.

Fault Code 12 Lid Lock Switching Device Failure.

Remedy: Check that there are no short circuits in the lid lock circuit which may have caused the failure in the sensor module.

The resistance of the lid lock should be between 50 and 100 ohms.

If the circuit is correct, replace the sensor module.

service manual

link PM'd

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...