GE Washer WBXR1060T2WW fills then stops
Posted 30 April 2005 - 09:46 AM
Posted 30 April 2005 - 11:05 AM
Posted 30 April 2005 - 11:10 AM
Posted 30 April 2005 - 11:16 AM
If that results in no change, I recommend testing the contacts on the pressure switch and timer. If you would be so kind and to post the wiring diagram for your washer, I will gladly assist you in identifying the exact locations you need to test.
Posted 30 April 2005 - 11:25 AM
not sure what the circuit board on the back of the control panel is. Any thoughts.
Posted 30 April 2005 - 11:31 AM
Posted 30 April 2005 - 12:25 PM
1) Drain all the water. Advance the timer to "spin" and note whether it spins or not.
2) Measure the voltage at the terminals of the drive motor when it is supposed to be ON.
Posted 30 April 2005 - 07:23 PM
The force says it is possible when your wife threw that last article of clothing into the washer she dislodged your lid switch actuator
Sometimes the white oval paddle on the lid switch assembly gets dislodged.
Open and close the lid. Do you hear the lid switch clicking?
Posted 01 May 2005 - 12:00 PM
Have not tried to measure the voltage at the drive motor. hopefully I'll get a chance later today.
The switch is working fine. I measured the voltage and current while opening and closing the lid.
Posted 01 May 2005 - 01:36 PM
Posted 03 May 2005 - 10:38 AM
Posted 03 May 2005 - 04:58 PM
Thanks for the followup report.
DIYers: Save time and money by learning the secrets of appliance repair... Click Here!
Posted 03 May 2005 - 06:00 PM
Posted 27 April 2006 - 06:02 AM
Posted 27 April 2006 - 07:21 AM
The early versions of the "newer" GE washers had a Hall-Effect device attached to the transmission to, as Jedi pointed out, count basket rotations (over-engineered or what?). Reference to this is made in the documentation which comes with the replacement transmissions (which don't have this "feature"). I believe that it was simply a case of leaving it disconnected if the transmission was replaced.
As to what you do if the board itself fails, that's another matter. Like yourself, I can't see this referred to on any of the online parts breakdowns. Jedi (who sees more GE than most of us) may know what to do. Other than him, best suggestion I can offer is to make a call to the people at RepairClinic.com on 1-800-269-2609. If anyone can help, they can.
Posted 27 April 2006 - 04:21 PM
Posted 27 April 2006 - 05:06 PM
Posted 27 April 2006 - 08:40 PM
Posted 28 April 2006 - 08:45 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users