Hello my Fridaire Front Load wash machine model number LTF2140ES0 is not running through any cycles. When I set the dial and press start the door locks and it sucks in a little bit of water and then just stops. The door stays locked and the LED's all stay on but the machine itself doesn't do anything. When I hit the stop button it unlocks the door and won't drain or anything like that. I am wondering if this sounds like a problem which could be fixed easily or if its going to be more trouble then anything else. I have an older machine to take its place but the front load has water in it and I would like to know how to drain that. I really appreciate any advice I could get on the subject thank you in advance!
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Fridaire front load machine sucks in a little water then stops responding LTF2140ES0
Started by Darryl Schweitzer, Nov 07 2011 08:26 PM
drain fridaire wont run through cycles help LTF2140ES0
4 replies to this topic
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
Scottthewolf
-
- Academy Fellow
-
- 1,919 posts
Senpai
- Location: USA
- Flavorite Brew:Dunkin Donuts Coffee
Posted 07 November 2011 - 08:44 PM
What happens when you manually move it to DRAIN/SPIN?
The last one I had that did the same thing was a faulty motor control board in the bottom of the machine.
Tech sheet should be found in the bottom taped to the side panel inside the machine.
The last one I had that did the same thing was a faulty motor control board in the bottom of the machine.
Tech sheet should be found in the bottom taped to the side panel inside the machine.
Scott Wolf
#3
DurhamAppliance
-
- Grand Master Funk
-
- 1,749 posts
Sho' Nuff Chozin
- Location: USA
- Flavorite Brew:Bells Two Hearted
Posted 07 November 2011 - 09:12 PM
I would also check pump and dispenser door.
Appliantology is, however appliances are not, an exact science for I know there are a few refrigerators that actually hate me.
The simplest explanation is most likely the correct and least expensive one, unless it's your compressor or motherboard" Occam as an appliantologist
"When you have eliminated all the impossible, whatever remains, however implausible, must be the logic truth; unless it's your compressor or motherboard." Mr. Spock as an appliantologist
"I think, therefore I have no earthly idea why this thing is not working...I got nothin'...". Rumored to have been uttered by a frustrated Descartes while diagnosing his GE Profile.
The simplest explanation is most likely the correct and least expensive one, unless it's your compressor or motherboard" Occam as an appliantologist
"When you have eliminated all the impossible, whatever remains, however implausible, must be the logic truth; unless it's your compressor or motherboard." Mr. Spock as an appliantologist
"I think, therefore I have no earthly idea why this thing is not working...I got nothin'...". Rumored to have been uttered by a frustrated Descartes while diagnosing his GE Profile.
#4
Samurai Appliance Repair Man
-
- Fermented Grand Master
-
- 24,321 posts
Your Sometimes-Lucid Host
- Location: USA
- Flavorite Brew:Kirin Ichiban
Posted 07 November 2011 - 11:46 PM
Get the tech sheet from behind the bottom front panel and try putting the machine into diagnostic mode. Do tell.
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
#5
RegUS_PatOff
-
- Grand Master Funk
-
- 30,269 posts
Sensei
- Location: USA
- Flavorite Brew:Chief NTSC Black & White
Posted 08 November 2011 - 01:18 AM
.
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
Also tagged with one or more of these keywords: drain, fridaire, wont run through cycles, help, LTF2140ES0
 |
Appliantology Appliance Repair Forums →
The Kitchen Appliance Repair Forum →
Bosch Dishwasher SHU9915UC-U11Started by reeferman, 20 May 2013  Drain
|
|
|
|
Appliantology Appliance Repair Forums →
The Laundry Appliance Repair Forum →
LG WASHERStarted by dryerman45, 18 Feb 2013 DRAIN
|
|
|
||
Appliantology Appliance Repair Forums →
The Kitchen Appliance Repair Forum →
GE REFRIDGERATOR DISPENSER ISSUESStarted by dryerman45, 03 Jan 2013 HELP
|
|
|
||
Appliantology Appliance Repair Forums →
Appliance Service Manual Requests →
New Appliance Service Manual added: Recirculation and Drain in a Whirlpool Calypso WasherStarted by Samurai Appliance Repair Man, 29 Dec 2012 whirlpool, calypso, drain, recirc and 1 more...
|
|
|
||
Appliantology Appliance Repair Forums →
The Laundry Appliance Repair Forum →
Whirlpool Washer 110.92591200 does not drain completelyStarted by murfndbox, 03 Dec 2012 Drain, washer
|
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
