whirlpool calypso m#gvw9959k02
Posted 09 November 2011 - 10:39 AM
Posted 09 November 2011 - 12:44 PM
Current, Instantaneous. A spike of 26 amps (or higher) detected at the motor.
Posted 09 November 2011 - 12:47 PM
CA or CI Average Current Limit, OR Instantaneous Current Limit
If a status signal comes back from the motor controller that a current limit has been breached,
the unit will return to standby mode and display either “CA” for average current limit trip, or “CI” for instantaneous current limit trip.
Average current trip occurs if there is a 2-second average of current draw greater than 5.55 Amps at the motor windings.
Instantaneous current trip occurs if there is a spike of 26 Amps instantly at the motor windings.
➔ This may signify problems with the drive motor, thermal protector, or motor controller.
➔ Overloading the unit may cause this problem.
■ Press Stop/Cancel to clear the display.
Tech Sheet - 8530143
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
Posted 09 November 2011 - 01:13 PM
Usual occurrance with these, is the boot seal around the U-joint leaks and water siezes up the mechanism and the motor binds
whip the washplate outta there and see if that isn't the case
- Samurai Appliance Repair Man likes this
For service manuals and lots of other goodies, become an Apprentice ==> Apprenticeship
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users