Goodman Furnace gmp100-55 blinks
Posted 01 December 2011 - 09:32 PM
Posted 02 December 2011 - 07:13 AM
On a call for heat use your volt meter to verify low voltage at the gas valve.
If you have voltage tap on the gas valve with the handle of a screwdriver.
This sometimes will open the valve.
If this works,replace the gas valve.
If it does not work,replace the gas valve not the control board.
If you do not have voltage at the gas valve,verify all circuits(roll out switches,pressure switches) etc. from the board to the valve.
Re-set,repair or replace the defective part.
Posted 02 December 2011 - 04:56 PM
Posted 03 December 2011 - 07:12 AM
Edited by jumptrout, 03 December 2011 - 08:55 AM.
Posted 03 December 2011 - 08:45 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users