Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Buderus GB142-24 issues


luke54

Recommended Posts

Just had the system installed and having some teething problems, hoping somebody can shed some light.

Install went with no real issues and boiler makes all the heat I need. It's setup to do Indirect hot water, made by Bradford-White model sw250rl.

Here's the issue, when calling for hot water I get error codes that I believe are casued by air pockets.

The system fires up and after about a minute I hear a solenoid open and I get some fluctuations in pressure which shuts the system down and gives either a "2F" or "4A" code.

These have nothing to do with either air pockets or fluctuation in pressure.

When making heat the system runs fine, no fluctuations and no trouble codes.Only problems when making hot water.

I've bled the system a few times and it seems to have helped but I can't seem to get it to run effortlessly.

I was told that both the heat loop and hot water loop are connected to each other so why is there only an issue on one loop?

I'm having the installer install another bleeder on the system but there has to be a better way for this thing to run.

Thanks for any help you guys can give me, Eric

Link to comment
Share on other sites

  • 2 months later...
  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • luke54

    1

  • Daveb1972

    1

Popular Days

Top Posters In This Topic

Not sure if you ever got this fixed, Can you post a picture, or diagram of the piping. Sounds like something reall goofy going on.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...