Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Goodman furnace gmt070-3 Blower works, gas comes on, no spark.


NickG

Recommended Posts

Just wondering if this could be as simple as an ignitor or if you would start elsewhere.

The blower comes on. The valve is heard opening. Gas flows in. Then nothing. No spark. Gas stops. Red status light remains solid. NO blinking.

Where to start? Replace ignitor?

Thanks!

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • NickG

    2

  • applianceman18007260692

    2

Top Posters In This Topic

Posted Images

Unplug the ignitor quick connection and see if the ignitor has continuity. If it does then see if power is going to the ignitor. Hunt down all rollout/limit switches and makes sure they all are not tripped. If you find a tripped limit look for reasons why such as a partially blocked smoke stack, rusted burners etc. If all the switches are fine then the control board may need to be replaced.

Edited by applianceman18007260692
Link to comment
Share on other sites

Thanks. I went for the ignitor and replaced it hoping that was it. That was it. Appreciate the reply!

I need to figure out how to test this stuff. I've done a lot of work on many things, but electric circuitry is where I have little to no experiance.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...