Hi all, been a while since I last visited. My dryer drum turns but the burner doesn't attempt to light. Usually the ignitor will glow after running a few seconds but not now.
I have zero volts at the ignitor plug at startup and forever after.
The high limit near the burner cone has continuity.
Where is the diagram stashed on or in the dryer?
What resistance readings should I get on the ignitor, flame sensor, and gas valve coils?
Are there any other components I should be checking?
Thank you.
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Whirlpool Duet gas dryer GGW9200LW1 flame won't ignite
Started by mcfarmall, Dec 09 2011 05:58 AM
Burner wont light
5 replies to this topic
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
RegUS_PatOff
-
- Grand Master Funk
-
- 30,255 posts
Sensei
- Location: USA
- Flavorite Brew:Chief NTSC Black & White
Posted 09 December 2011 - 06:39 AM
Check the white Thermal Fuse on the Blower Housing
Ignitor should be anywhere less than 1000 OHMs
Checking the Gas Valve Coil resistance won't tell you much...
Ignitor should be anywhere less than 1000 OHMs
Checking the Gas Valve Coil resistance won't tell you much...
- Samurai Appliance Repair Man likes this
.
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
#3
mcfarmall
-
- Grasshopper
-
- 15 posts
Samanera
Posted 09 December 2011 - 08:47 AM
Thanks, is the white thermal fuse located on the motor side of the blower housing or somewhere else? Also, is there a schematic stashed somewhere on the dryer? I haven't extracted the machine from its cubby hole yet...the only panel I have removed is the toe kick panel.
#4
RegUS_PatOff
-
- Grand Master Funk
-
- 30,255 posts
Sensei
- Location: USA
- Flavorite Brew:Chief NTSC Black & White
Posted 09 December 2011 - 09:51 AM
Thermal Fuse # 59
I'm not sure where the 16 page tech sheet is located... either behind the ToeKick Panel, or maybe in the Control Panel
I'm not sure where the 16 page tech sheet is located... either behind the ToeKick Panel, or maybe in the Control Panel
.
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
#5
mcfarmall
-
- Grasshopper
-
- 15 posts
Samanera
Posted 09 December 2011 - 11:57 AM
Most excellent, thanks for the diagram!! I can't wait to go home and do some more checking. I'm assuming that the item #59 is non-resettable and would need to be replaced if open. However, I could jumper it out for a test run.
#6
kdog
-
- Academy Fellow
-
- 7,428 posts
RoughShod
- Location: Canada
- Flavorite Brew:Dickens Cider
Posted 09 December 2011 - 01:45 PM
- Samurai Appliance Repair Man likes this
Help us keep the lights on: buy appliance parts here ==> http://repairclinic.com
For service manuals and lots of other goodies, become an Apprentice ==> Apprenticeship
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
