Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Begin your journey to appliance repair mastery…

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
Primergy

No Heat & bizarre stuff - Miele T1576 (Dryer, Novotronic)

3 posts in this topic

Hello forum,

for 4 years now we lived happy with our Miele dryer.

(new old stock, the model is older)

Quick summary of symptoms and diag. done so far.

  • Unit stopped drying properly, no previous occurrences, no heat!
  • Upon opening it became apparent that condensation was everywhere
  • exhaust pipe had separated from blower casing (probably due to household move in recent past?!

  • took off top & bottom, cleaned inside, drying for a day.
  • hooked up unit, does not throw an error code.
  • Hmm, smells like burned hairdryer after I shut it off. Back of the drum does get hot.
  • Blockage unlikely, pumped out air volume is plenty.
  • At one time the heating element can be seen glowing dark orange after a few seconds when opening the door while running. After that it works during more test runs.
  • Put machine together completely and connect everything - again no heat!.
  • Touching the drum I feel a slight tingling resonance when plugged in, this time I wonder and measure:
  • Voltmeter shows 50-60VAC between me and the drum - oups!
  • Dryer responds to all control, no problem

I did not see any corrosion, will go over all major terminals tomorrow.

At this point I am a tad uncertain what to assume.

Over the day I had heating element, sensor, thermal resistor etc. in my had...

Now I add faulty connections and possibly fried boards to my suspicions.

HELP:

  • Any ideas on how to proceed, what the culprit most likely is?
  • This is my first time inside a dryer. I was not entirely sure what I would get into, removing the drum, so I decided to work with limited access and limited space. Is there a manual somewhere for this series Novotronic dryers?

One lesson from this: If your Dryer is being moved over 2500miles, check everything inside :yucky:

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

Addon:

It could be a grounding issue here, may / may not be related to the heater problem?!

Dryer worked fine in this setup for ~3months.

After the move we only have an un-grounded 3-prong 220V outlet, compared to the 4-prong 220V outlet at our old location.

After some research, I rigged the dryer with a 3-prong cord.

Share this post


Link to post
Share on other sites

Please describe "rigged" in detail.

Share this post


Link to post
Share on other sites