Burning smell from a Whirlpool GSW9800PW2 washer
Posted 11 December 2011 - 11:21 PM
Posted 12 December 2011 - 02:30 AM
- Samurai Appliance Repair Man likes this
For service manuals and lots of other goodies, become an Apprentice ==> Apprenticeship
Posted 12 December 2011 - 08:23 AM
The simplest explanation is most likely the correct and least expensive one, unless it's your compressor or motherboard" Occam as an appliantologist
"When you have eliminated all the impossible, whatever remains, however implausible, must be the logic truth; unless it's your compressor or motherboard." Mr. Spock as an appliantologist
"I think, therefore I have no earthly idea why this thing is not working...I got nothin'...". Rumored to have been uttered by a frustrated Descartes while diagnosing his GE Profile.
Posted 13 December 2011 - 09:11 AM
Any other suggestions on what check next?
Posted 15 December 2011 - 12:01 PM
- kdog likes this
Posted 15 December 2011 - 11:33 PM
Posted 17 December 2011 - 10:33 AM
as for the oil I mentioned - it is probably 2 drop that are on the floor, there is a little bit of oil on the bottom of the transmission (it is not a large amount but it seems to be coming from the split in the transmission case. The clutch area is totally dry of oil
the smell is more of a mix between clutch and electrical. it is not rubber smell, not any kind of rubber I have smelled. I dont claim to have a super smeller nose, so I could definitely be wrong.
what is the easiest way to by pass the lid switch?
Posted 17 December 2011 - 11:47 AM
The first three are ones I use, the fourth one is used by someone that should NOT be any where near electrical work................... DO NOT be that person, use an insulated 'jumper'....... Okey Dokey ....
Edited by RegUS_PatOff, 17 December 2011 - 01:28 PM.
added "return" before and after pictures
Posted 19 December 2011 - 07:22 PM
Any other suggestions on things to check, or should I consider myself lucky and move on?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users