Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Maytag MDB9150AWS Dishwasher Service Manual Please


jss_old

Recommended Posts

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • jss_old

    2

  • RegUS_PatOff

    1

Popular Days

Top Posters In This Topic

all I could find besides some service bulletins

what problem are you having ?

M0407343-00007.png

Link to comment
Share on other sites

Thanks for having a look. Unit stopped midcycle and screen is blank. Replaced the latch switch without change so going to swap out the control unit. By eye looks to be no big deal (other than cost of the part!) but primarily concerned about what I can't see -- anything special I should watch for or do/not do when replacing it? Thx again.

Edited by jss
Link to comment
Share on other sites


×
×
  • Create New...