FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Bosch WVT1260 Washer Dryer.. No heat on the drying cycle
#1
Posted 19 December 2011 - 10:07 AM
- All 3 thermostats/cut-outs check-out OK.
- Element OK - measures 35 Ohms.
- 240VAC on both sides of heating element.
- Dryer motor not running.
- No 240VAC on heater motor starter capacitor (on either side).
- Water trickle into condensation chamber OK.
Seems like neither the heater element or dryer motor are not being turned on.... does anyone have any ideas what could be causing this?
Drum is turning ok, and seems to go through drying cycle, but no heat...
Are there any other temperture cutouts or sensors I should take a look at?
Any experts out there who can point me in the right direction?
#2
Posted 19 December 2011 - 10:54 AM
If the Heating Element is good (35 OHMs), and there's 240v across it, it should be glowing- 240VAC on both sides of heating element.
- Dryer motor not running.
... Drum is turning ok,
Motor not running, but Drum is turning ?
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
Also tagged with one or more of these keywords: drying cycle, WVT1260, Bosch
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com














