Jump to content



Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.


Parts Search
Site Search

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums


To get started, click here.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

Kenmore HE model 110.44921301 tub disassembly


  • Please log in to reply
4 replies to this topic

#1 dannydelk

dannydelk

    Unsui

  • Grasshoppah
  • Pip
  • 1 posts
  • Flavorite Brew:Coors Light

Posted 26 December 2011 - 10:06 PM

I am in search of instructions to remove and disassemble the tub from my washer. It has a broken spider and I am ordering a new drum. Any help would be appreciated.

Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#2 RegUS_PatOff

RegUS_PatOff

    Sensei

  • Academy Instructor
  • PipPipPipPipPip
  • 33,588 posts
  • Location: USA
  • Flavorite Brew:Chief NTSC Black & White

Posted 27 December 2011 - 09:44 AM

http://www.repaircli...R=154&N=1515081

 

Inner-Tub-W10269756-01090406.jpg

http://www.repaircli...R=154&N=1515000

 

Outer-Tub-W10253866-01256409.jpg


.

one of my video productions: “Easter Seals: Walk With Me”

every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962

RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw

#3 washertech26

washertech26

    Sōhei

  • Appliantologist
  • PipPipPip
  • 124 posts

Posted 27 December 2011 - 04:51 PM

Forget about it machine is not worth repair... It is a two man 2.5 hour job for tech you double that plus the parts.. If it was a Maytag Neptune you can replace the spider without removing the tub its much easier but this one the tub must be removed from the cabinet.. It is a very messy job and would have to be done outside or in a garage... Personally I do not recommend you doing it ... Or this will be you > :wallbash:

#4 Comstock_Services

Comstock_Services

    Wine is fine but Whiskey is quicker

  • Sublime Master of Appliantology
  • PipPipPip
  • 462 posts
  • Location: USA
  • Flavorite Brew:Tito's Vodka,Shiner Blonde, Shiner Bock

Posted 27 December 2011 - 05:55 PM

I would say that it can be done by one tech, but it still takes close to 4-5 hours to R&R the inner tub/spin basket. You'd be spending about 1/2 of what a new washer cost, even if you could get the parts at wholesale prices it aint worth it.

Edited by Comstock_Services, 27 December 2011 - 07:59 PM.

Insert smart ass remark here____
 

Help us keep the lights on: buy appliance parts here ==> http://repairclinic.com


For service manuals and lots of other goodies, become an Apprentice ==> Apprenticeship

 

http://www.mrappliance.com/coastalbend


#5 washertech26

washertech26

    Sōhei

  • Appliantologist
  • PipPipPip
  • 124 posts

Posted 27 December 2011 - 07:57 PM

I am not going to hurt my old ass that is a two man job for me




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."


The Appliance Guru | Master Samurai Tech

Real Time Analytics